GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
5-38 Section 5-5 - Common Service Platform
5-5-11 PM
Field is not yet populated.
Run the Planned/Preventive/Proactive Maintenance tools during such PM visits as running error logs
and deleting old test files.
5-5-12 Remote Software/Option Installation and Updates
The Common Service Platform provides for remote software downloads including A11 downloads to the
scanner. Any file transferred to the scanner will be in the form of an installation package. The actual
content of the installation package is dependent on each product. The Service Platform downloads the
software module into an appropriate directory and executes the product-specific installer executive.
Software installation is simple and automated with a Graphic User Interface (GUI), where applicable.
• Supports software upload via remote transmission
• Supports software upload via Service Platform
• Supports partial upgrades
• Supports de-installs of the latest partial upgrade
• Supports remote activation/installation of software options
• Options can be activated permanently
• Options can be activated for a timed period
• Options can be limited to a number of uses
• Options that expire must give notice to the user that the option has expired
5-5-12-1 Remote System Shutdown and Restart
The Service Platform provides the ability to restart the system as per standard shutdown/startup
procedures. Remote shutdown will only be provided if a software-controlled shutdown exists on the
scanner. Scanner system restart is always accessible from the OLC.
5-5-12-2 File and/or Image Transfer
The Service Platform supports file transfers and archived image transfers to the OnLine Center. The
Service Platform provides interfaces of the displayed images for transfer to the OLC.
Figure 5-62 Planned Maintenance Page
To Next Page
Loading...
Need help?
General
