GE LOGIQ 7 Service Manual

GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
Section 1-1 - Overview 1-1
Chapter 1
Introduction
Section 1-1
Overview
1-1-1 Purpose of Chapter 1
This Chapter describes important issues related to safety servicing this ultrasound machine. The
service provider must read and understand all the information presented here before installing or
servicing a unit.
1-1-2 Chapter Contents
1-1-3 Purpose of Service Manual
This manual provides service information on the LOGIQ™ 7 Ultrasound Scanning System. It contains
the following chapters:
1.) Chapter 1, Introduction: Contains a content summary and warnings.
2.) Chapter 2, Pre-Installation: Contains any pre-installation requirements for the LOGIQ™ 7.
3.) Chapter 3, Installation: Contains the LOGIQ™ 7 installation procedure with installation
checklist.
4.) Chapter 4, Functional Checks: Contains functional checks that must be performed as part of
the installation, or as required during servicing and periodic maintenance.
5.) Chapter 5 Theory: Contains block diagrams and functional explanations of the LOGIQ™ 7
electronics.
6.) Chapter 6, Service Adjustments: Contains instructions on how to make any available
adjustments to the LOGIQ™ 7.
7.) Chapter 7, Diagnostics/Trouble Shooting: Provides procedures for running and diagnostic
or related routines for the LOGIQ™ 7.
8.) Chapter 8, Replacement Procedures: Provides disassembly procedures and reassembly
procedures for all changeable FRU.
9.) Chapter 9, Renewal Parts: Contains a complete list of replacement parts for the LOGIQ™ 7.
10.)Chapter 10, Periodic Maintenance: Provides periodic maintenance procedures for the
LOGIQ™ 7.
Table 1-1 Contents in Chapter 1
Section Description Page Number
1-1
Overview
1-1
1-2
Important Conventions
1-5
1-3
Safety Considerations
1-10
1-4
EMC, EMI, and ESD
1-21
1-5
Customer Assistance
1-22

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English