GE LOGIQ 7 Service Manual

GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
Section 6-5 - Monitor and LCD Adjustments 6-25
6-5-5-2 For Technart (cont’d)
b.) Check the upper, lower, left, and right edge of the screen. They should be centered evenly in
the monitor.
- If they are vertically out of alignment, adjust VPosition.
- If they are horizontally out of alignment, adjust HPosition.
c.) Display the LCD monitor menu and press the MENU button once. The following menu appears.
d.) Repeat to press the MENU button until the “HPosition” or “VPosition” blinks.
e.) Repeat to press the PLUS or MINUS button until the screen should be centered evenly in the
monitor.
f.) Press the AUTO button once to save the setting.
g.) Repeat to press the MENU button until the “Exit” blinks
h.) Press the AUTO button once to exit from the menu.
6.) Go to 6-5-5-2-3 Completing adjustment.
Figure 6-33 H Position or V Position

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English