GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
8-40 Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10-7 Regional Setup (For the system with language other than English ONLY) (cont’d)
1.) Select Utility> System> General>Regional Option Menu,
2.) Click on Languages tab.
3.) Check Install files for East Asian languages.
4.) Click on Apply.
5.) The system requires the re-boot automatically, shut down the system.
Figure 8-100 Regional Option
NOTICE
You do not need to change “Language used in menus and dialogs” option. It should be English.
Check
Do not
Change
English.
To Next Page
Loading...
Need help?
General
