GE LOGIQ 7 Service Manual

GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
8-22 Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-8-5 TCP/IP Filter Setup
1.) On the desktop, left-click on My Network Places, then right-click on Properties...
2.) Double-click Local Area Connection or Local Area Connection #2 (if you do NOT find "Local
Area Connection").
3.) Select Internet Protocol (TCP/IP) , then click Properties button.
Figure 8-76 Local Area Connection
Figure 8-77 Internet Protocol (TCP/IP)

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English