GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-35
8-2-10-2 Confirmation of the software version (cont’d)
2.) Touch the System button on the Touch Panel.
3.) Click on About tab. The software version will be shown on the monitor as shown. Confirm the
following:
- Software Version (R
8.x.x)
- Preset Resion (Americas, Europe, Asia, Japan, or None)
- Image Part Number (described on the Base System Software Image DVD)
Figure 8-92 System
Figure 8-93 About Tab
Press System
button.
Click on the About tab
Software Version
R 8.x..x
Base System Software CD-ROM
Part Number
xxxxxxx
Preset Region
(See 8-2-10-10
Regional Preset.)
To Next Page
Loading...
Need help?
General
