HP 9000 Series Service Manual

Chapter 6 6-21
D270/D370, D280/D380/R380 and D390/R390 Front Panel LCD Codes
Major Code Category C: System Initialization
Table 6-12 System Initialization Codes
Ostat Code Description
INIT C10x Starting the monarch processor selection, where x = 0 or 1
INIT C200 Starting memory configuration
INIT C201 Starting the destructive memory initialization
INIT C202 Starting the non-destructive memory initialization
INIT C20F RAM configuration forward progress indicator
TEST C210 Memory hard reset
TEST C220 Physical configuring memory
TEST C230 Sizing memory banks
TEST C240 Loading memory configuration from EEPROM
TEST C250 Configuring memory interleave
TEST C260 Testing memory interleave
TEST C261 Testing first page of memory
TEST C262 Testing dual issue
TEST C263 Testing memory, write test
TEST C264 Testing memory, read/write test
TEST C265 Testing memory, read test
TEST C270 Updating memory configuration
TEST C280 Configure to EEPROM
TEST C2E0 Memory testing done
TEST C2A0 Flat configuration test
TEST C2B0 Flat RAM test
TEST C2C1 Memory soft reset
TEST C2C2 A non destructive RAM test
INIT C300 Monarch is executing extended selftests
INIT C30C Monarch slave check, making sure slaves responded
TEST C3AA Starting internal test of final slave state
TEST C3EE Internal slave test complete

HP 9000 Series Specifications

General

Brand	HP
Model	9000 Series
Category	Server
Language	English