HP 9000 Series Service Manual

Appendix A A-1
System Specifications
A
System Specifications
This appendix contains the environmental, electrical, and physical specifications for the
HP 9000 D Class and R Class Enterprise systems.
Table A-1 Environmental Specifications
Table A-2 AC Electrical Specifications for 350W Power Supply
Description Specification
Operating Temperature
5° to 35° C (41° to 95° F)
Non-operating Temperature
-40° to 70° C (-40° to 158° F) (with no
internal tape media device)
-40° to 45° C (-40° to 113° F) (with
internal tape media device)
Temperature Rate of Change
20° C (36° F)/hr. (with no internal tape
media device)
10° C (18° F)/hr. (with internal tape
media device)
Operating Humidity 15% to 80% RH non-condensing, max. wet bulb
(at 26
°
C (79
°
F) with internal tape media
device)
Non-operating Humidity 5% to 90% RH non-condensing (at 65
°
C/149
°
F)
rate of change, 30% RH/hr.
Operating Altitude 0 to 3.0 KM (0 to 10,000 ft) above sea level
Non-operating Altitude 0 to 4.5 KM (0 to 15,000 ft) above sea level
Acoustics
Deskside (LwA) = 5.4 B @ 25° C (77° F)
Operator Post = 45 dB-LpA @ 25° C (77°
F), no prominent tone
Racked System (LwA) = Not available
Safety
UL Listed to UL1950
CSA Certified to CSA C22-2 No. 950
TUV GS Mark, compliant with
EN60950, and IEC 950
Description Specification
AC Input Voltage Range 90 to 140 VAC or 198 to 264 VAC

HP 9000 Series Specifications

General

Brand	HP
Model	9000 Series
Category	Server
Language	English