mad-passthrough Enable or disable MAD passthrough on the LACP trunks.
min-active-links Configure the threshold for the minimum number of active
member links in a LACP trunk group, for it to be operational.
active Enable active LACP.
passive Enable passive LACP.
static Set the mode of a static LACP port to active or passive.
Switch(eth-Trk11)# lacp enable-timer
<0-604800> Enter a number.
Switch(eth-Trk11)# lacp enable-timer 120
show lacp min-active-links
Syntax
show lacp min-active-links
Description
Shows the LACP minimum active links information for each trunk group.
Example
switch# show lacp min-active-links
Trunk Minimum active Enable-Time
Group Links (seconds)
------- --------------- ------------
Trk1 0 0
Trk3 0 0
Trk11 5 120
Trk12 3 356
show running-configuration
switch# show running-config
Running configuration:
; hpStack_KB Configuration Editor; Created on release #KB.16.08.0000x
; Ver #14:0f.6f.f8.1d.fb.7f.bf.bb.ff.7c.59.fc.7b.ff.ff.fc.ff.ff.3f.ef:60
stacking
member 1 type "JL074A" mac-address ecebb8-117400
member 1 flexible-module A type JL079A
member 2 type "JL074A" mac-address ecebb8-1d1580
member 2 flexible-module A type JL079A
member 3 type "JL075A" mac-address 1c98ec-996c80
member 3 flexible-module A type JL083A
member 3 flexible-module B type JL081A
exit
hostname "Switch-2"
mirror 1 port 1/16
mirror 2 port 1/32
trunk 1/35-1/36,2/35-2/36 trk1 lacp
trunk 1/A1,1/A2,2/A1,2/A2 trk3 lacp
trunk 1/1-1/2,2/1-2/2,3/1-3/3 trk11 lacp
trunk 3/13-3/14,3/A1-3/A2 trk12 lacp
interface Trk11
lacp min-active-links 5
lacp enable-timer 120
exit
interface Trk12
lacp min-active-links 3
Chapter 5 Port Trunking 141
To Next Page
Loading...
Need help?
General