Group access levels
The switch supports eight predefined group access levels, shown in the following table. There are four levels for
use by version 3 users and four are used for access by version 2c or version 1 management applications.
Table 19: Predefined group access levels
Group name Group access type Group read view Group write view
managerpriv Ver3 Must have
Authentication and Privacy
ManagerReadView ManagerWriteView
managerauth Ver3 Must have
Authentication
ManagerReadView ManagerWriteView
operatorauth Ver3 Must have
Authentication
OperatorReadView DiscoveryView
operatornoauth Ver3 No Authentication OperatorReadView DiscoveryView
commanagerrw Ver2c or Ver1 ManagerReadView ManagerWriteView
commanagerr Ver2c or Ver1 ManagerReadView DiscoveryView
comoperatorrw Ver2c or Ver1 OperatorReadView OperatorReadView
comoperatorr Ver2c or Ver1 OperatorReadView DiscoveryView
Table 20: SNMPv3 Params and Group Configs Combinations
SNMPv3 Params SNMPv3 group Snmpv3 user config
noauth (no authentication and no
privacy)
operatornoauth snmpv3 user "user1"
auth (authentication and no privacy) managerpriv,
managerauth,operatorauth,
operatornoauth
snmpv3 user "user1" auth md5
"45800d22ccb8b485ab52fe2d8b92e
a85"
priv (authentication and privacy) managerpriv,
managerauth,operatorauth,
operatornoauth
snmpv3 user "user1" auth md5
"45800d22ccb8b485ab52fe2d8b92e
a85" priv des
"45800d22ccb8b485ab52fe2d8b92e
a85"
Each view allows you to view or modify a different set of MIBs:
• Manager Read View – access to all managed objects
• Manager Write View – access to all managed objects except the following:
190 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
To Next Page
Loading...
Need help?
General