EasyManuals Logo

HP Aruba JL253A User Manual

HP Aruba JL253A
775 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #277 background imageLoading...
Page #277 background image
Validation rules
Validation Error/Warning/Prompt
Verify max-bindings value entered is in the range Invalid input: <value>
If DHCPv6-Snooping is already configured before
entering the command and current bindings are
greater than the value being set.
Existing bindings %d are more than the max-
bindings being configured, and the maximum
limit will be applied once the number of existing
bindings fall below this limit
If the value is being configured for a trusted port Cannot configure maximum binding for DHCPv6
snooping feature on a trusted port
If the value is being configured for a port which is
not a part of a dhcpv6-snooped vlan
Port %s is not a part of a DHCPv6-snooping
VLAN.
If the max-binding value is being set for a Dynamic
trunk.
Cannot configure DHCPv6 Snooping on a port
when Dynamic Trunking is enabled on that port.
If the number of static bindings is greater than the
max-binding value being set.
Cannot configure the maximum binding value
because the number of static bindings on the
port exceeds the maximum binding value.
If a port on which max-binding is enabled is being
put into a trunk.
Cannot add a port to a trunk group when
DHCPv6 Snooping Maxbinding is configured on
that port.
If a trunk has max-bindings configured on it. And the
trunk is being removed.
Cannot remove the port %s from the trunk group
because DHCPv6 Snooping max-binding is
configured on the trunk and removing the port
will delete the trunk.
If DT trunk is being configured on a max-binding
enabled port.
Cannot configure Distributed Trunking on a port
when DHCPv6 Snooping max-binding is
configured on that port.
IMPORTANT: DT trunks can use jumbo VLAN as usual, but user needs to ensure that jumbo is
configured on both the DT pairs, otherwise packet drops/fragmentations can be seen.
dhcpv6–relay option 79
Syntax
[no] dhcpv6-relay option 79
Description
Enabling option 79 will force the DHCPv6 Relay agent to forward the client Link-layer address. Defaults to
disabled.
snmp-server enable traps dhcpv6-snooping
Syntax
[no] snmp-server enable traps dhcpv6-snooping [out-of-resources|errant-reply]
Chapter 9 DHCPv6 server 277

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Aruba JL253A and is the answer not in the manual?

HP Aruba JL253A Specifications

General IconGeneral
BrandHP
ModelAruba JL253A
CategorySwitch
LanguageEnglish

Related product manuals