150 Accumulated time (ms) spent in fast retrain since last AN.
9 Number of RFI Training Link Recovery Events since last AN.
3 Number of Link Recover Events since last AN.
Established link speed : 5000Mbps
Number of attempts to establish link : 5
Uptime since link was last established (ms) : 5099
Local port advertised speeds
1000Mbps 2500Mbps 5000Mbps 10Gbps
No Yes Yes No
Link partner speed capability
1000Mbps 2500Mbps 5000Mbps 10Gbps
Yes Yes Yes No
Link Partner matching vendor: Yes
Smart Rate port that is linked at 1Gbps
show interface C5 smartrate
Status and Counters - Smart Rate information for Port C5
Model : 0x03a1
Chip : 0xb4b3
Firmware (major) : 0x0002
Firmware (minor) : 0x0003
Firmware (candidate) : 0x0005
Firmware (provision) : 0x0001
Established link speed :1000Mbps
Number of attempts to establish link :5
Uptime since link was last established (ms) : 5099
Local port advertised speeds
1000Mbps 2500Mbps 5000Mbps 10Gbps
No No No No
Link partner speed capability
1000Mbps 2500Mbps 5000Mbps 10Gbps
Yes Yes Yes Yes
Link Partner matching vendor: Yes
Rate-Limiting — GMB features when Fast-Connect SmartRate ports are
configured
When Rate-Limiting or Guaranteed Minimum Bandwidths are configured for 5Gbps ports, the granularity of
percentage-based rates for the 5Gbps speed is in steps of 2%. For example, a 1% rate-limit for a 5Gbps port will
function as a 2% limit while a 5% limit will function as a 6% limit.
The Guaranteed Minimum Bandwith profiles will show the same behavior. For example on an 8-queue system,
the actual default servicing profile will be 2%, 4%, 30%, 10%, 10%, 10%, 16%, and 20%. The CLI and SNMP
768 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
To Next Page
Loading...
Need help?
General