cfg-backup
Syntax
cfg-backup {running-config | startup-config} config <FILE-NAME>
Description
Backs up the selected configuration to the flash file mentioned. When the firmware is downgraded to lower
versions, the details of only three configuration files appear in the show config files command.
Command context
config
Parameters
running-config
Copies the running configuration to switch flash file.
startup-config
Copies the startup configuration to switch flash file.
flash
Name of the configuration file in flash.
Usage
copy {startup-config | running-config} {sftp | tftp} <server address> <FILE-NAME>
The existing copy command copies the startup and running configuration to the TFTP or SFTP server.
Examples
switch(config)# cfg-backup
running-config Backup the running configuration to the flash file
mentioned.
startup-config Backup the startup configuration to the flash file
mentioned.
switch(config)# cfg-backup {running-config | startup-config}
config Backup the named configuration file.
switch(config)# cfg-backup {running-config | startup-config} config
ASCII-STR Enter an ASCII string.
show config files
Syntax
show config files
Description
Shows a list of configuration files available in the flash.
Command context
config
558 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
To Next Page
Loading...
Need help?
General