device-profile type device-name
Syntax
device-profile type [aruba-ap | aruba-switch | scs-wan-cpe |
device-name <DEVICE-NAME> associate <PROFILE-NAME> | enable | disable]
no device-profile type [aruba-ap | aruba-switch | scs-wan-cpe |
device-name <DEVICE-NAME> associate <PROFILE-NAME> | enable | disable]
Description
Associates the device profile with the type of device by identity.
The no form of this command removes the device profile from the device type.
Command context
config
Parameters
associate <PROFILE-NAME>
Selects the profile name associated with the device-type.
enable
Selects the profile of the device being enabled.
disable
Selects the profile of the device being disabled.
Usage
• The command device-profile type aruba-ap enable enables profile for Aruba-AP.
• Device Name is defined the same as Device Identity.
show device-profile
Syntax
Within the configure context:
show device-profile
Description
Show device profile configuration and status.
config
Show the device profile configuration details for a single, or all, profiles.
status
Show currently applied device profiles.
Usage
show device-profile config <PROFILE-NAME>
show device-profile status
716 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
To Next Page
Loading...
Need help?
General