HP Aruba JL253A User Manual

A civic address configuration
switch(config)# lldp config 2 medportlocation civic-addr US 2 1 CA 3
Widgitville 6 Main 19 1433 26 Suite_4—N 27 4 28 N4—3
switch(config)# show lldp config 2
LLDP Port Configuration Detail
Port : A2
AdminStatus [Tx_Rx] : Tx_Rx
NotificationEnabled [False] : False
Med Topology Trap Enabled [False] : False
Country Name : US
What : 2
Ca-Type : 1
Ca-Length : 2
Ca-Value : CA
Ca-Type : 3
Ca-Length : 11
Ca-Value : Widgitville
Ca-Type : 6
Ca-Length : 4
Ca-Value : Main
Ca-Type : 19
Ca-Length : 4
Ca-Value : 1433
Ca-Type : 26
Ca-Length : 9
Ca-Value : Suite_4-N
Ca-Type : 27
Ca-Length : 1
Ca-Value : 4
Ca-Type : 28
Ca-Length : 4
Ca-Value : N4-3
Viewing switch information available for outbound advertisements
Syntax:
show lldp info local-device [port-list]
Without the [port-list] option, displays the global switch information and the per-port information currently
available for populating outbound LLDP advertisements.
With the [port-list] option, displays only the following port-specific information that is currently available for
outbound LLDP advertisements on the specified ports:
• PortType
• PortId
• PortDesc
NOTE: This command displays the information available on the switch. Use the lldp config
<port-list> command to change the selection of information that is included in actual outbound
advertisements. In the default LLDP configuration, all information displayed by this command is
transmitted in outbound advertisements.
In the default configuration, the switch information currently available for outbound LLDP advertisements appears
similar to the display in the following example.
242 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08

HP Aruba JL253A Specifications

General

Brand	HP
Model	Aruba JL253A
Category	Switch
Language	English