Network Monitoring Port
Mirror Port: 5
Monitoring sources
------------------
VLAN_20
Disabling monitoring at the interface context and the global config level
switch(eth-1-3, 5)# no int 5 monitor
1
switch(eth-1-3, 5)# no monitor
switch(config)# no int 5 monitor
2
switch(config)# no int 1-3, 5 monitor
•
1
These two commands show how to disable monitoring at the interface context level for a single port or all
ports in an interface context level.
•
2
These two commands show how to disable monitoring at the global config level for a single port or a group of
ports.
Fans
There are three fan types:
• Power supply fans
• Fan-tray fans
• Stacking switch fans
show system
Syntax
show system [chassislocate | information | temperature]
Description
Shows global system information and operational parameters for the switch.
Command context
manager and operator
Parameters
chassislocate
Shows the chassis locator LED status. Possible values are ON, Off, and Blink. When the status is On or Blink,
the number of minutes that the Locator LED will continue to be on or to blink is displayed.
information
Displays global system information and operational parameters for the switch.
temperature
Shows system temperature and settings.
Chapter 12 Monitoring and Analyzing Switch Operation 449
To Next Page
Loading...
Need help?
General