SNMP MIB
SNMP support will be provided through the following MIB objects.
HpicfSyslogOriginId = textual-convention
Description
This textual convention enumerates the origin identifier of syslog message.
Syntax: integer
ip-address
hostname
none
Status
current
hpicfSyslogOriginId OBJECT-TYPE
Description
Specifies the content of a Hostname field in the header of a syslog message.
Syntax:
HpicfSyslogOriginId
Max-access
read-write
Status
current
Default
ip-address
Debug/syslog destination devices
To use debug/syslog messaging, you must configure an external device as the logging destination by using the
logging and debug destination commands. For more information, see Debug destinations on page 519
and Configuring a syslog server on page 521.
A debug/syslog destination device can be a syslog server and/or a console session. You can configure debug and
logging messages to be sent to:
• Up to six syslog servers
• A CLI session through a direct RS-232 console connection, or a Telnet or SSH session
Chapter 13 Troubleshooting 509
To Next Page
Loading...
Need help?
General