Description
Disables the diagnostic-reset via serial console.
No front-panel-security diagnostic-reset serial-console
no front-panel-security diagnostic-reset serial-console
Diagnostic Reset - Disabled
CAUTION:
Disabling the diagnostic reset prevents the switch from capturing diagnostic data on those rare
events where the switch becomes unresponsive to user input because of unknown reasons. Ensure
that you are familiar with the front panel security options before proceeding.
Serial console error messages
Error Message
RMON_BOOT_CRASH_RECORD1 Diagnostic reset sequence detected on serial console;
user has initiated diagnostic reset.
RMON_BOOT_CRASH_RECORD1 SMM: Diagnostic reset sequence detected on serial
console; user has initiated diagnostic reset.
RMON_BOOT_CRASH_RECORD1 STKM: Diagnostic reset sequence detected on serial
console; user has initiated diagnostic reset.
RMON_BOOT_CRASH_RECORD1 User has initiated diagnostic reset via the serial
console.
RMON_BOOT_CRASH_RECORD1 SMM: User has initiated diagnostic reset via the serial
console.
RMON_BOOT_CRASH_RECORD1 STKM: User has initiated diagnostic reset via the serial
console.
Console print STKM: HA Sync in progress; user initiated diagnostic
request via the serial console rejected. Retry after
sometime.
Console print STKM: Member is booting; user initiated diagnostic
request via the serial console rejected. Retry after
sometime.
Chapter 16 Virtual Technician 585
To Next Page
Loading...
Need help?
General