show ip-sla <ID> message-statistics
SLA ID : 1
Status : Running
SLA Type : UDP-Echo
Destination Address : 10.0.0.2
Source Address : 10.0.0.1
Destination Port : 2000
History Bucket Size : 25
Payload Size : 500
TOS : 0
Messages:
Destination Address Unreachable : 0
Probes Skipped Awaiting DNS Resolution : 0
DNS Resolution Failed : 0
No Route to Target : 0
Internal Error : 0
Local Interface is Down : 0
No Response from Target : 0
Successful Probes Sent : 3
Probe Response received : 3
Possibly Tail Dropped : 0
show ip-sla <ID> results
Syntax
show ip-sla <ID> results
Description
Shows the results for the last IPSLA UDP Jitter or UDP Jitter for VoIP test. Note this command is not valid for any
other SLA type.
Switch (config)# sh ip-sla 1 results
Test Results for SLA ID: 1
Probe Id : 10
SLA Type : UDP-Jitter
Destination IP Address : 10.2.2.2
Destination Port : 4444
Source IP Address : 10.2.2.2
Source Port : 5555
Number of Packets Sent : 10
Number of Packets Received : 10
Minimum Round Trip Time : 15
Maximum Round Trip Time : 32
Average Round Trip Time : 17
Square-Sum of Round Trip Time : 3235
Last Succeeded Probe Time : 2008-05-29 13:56:17.6
Extended Results:
Packet Loss in Test : 0%
UDP-Jitter Results:
RTT Number : 10
Min Positive SD : 4 Min Positive DS : 1
Max Positive SD : 21 Max Positive DS : 28
Chapter 17 IP Service Level Agreement 595
To Next Page
Loading...
Need help?
General