HP Aruba JL253A User Manual

ip routing
snmp-server community "public" unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-28
ip address dhcp-bootp
exit
vlan 100
name "VLAN100"
no ip address
exit
cfg-restore verbose
Syntax
cfg-restore {flash | tftp | sftp} <FILE-NAME> verbose
Description
Provides the details of configuration restore status and the list of commands to be added or deleted along with
cfg-restore.
Command context
config
Examples
switch(config)# cfg-restore flash config verbose
Current running-configuration will be replaced with 'config'.
Continue (y/n)? y
Configuration restore is in progress, configuration changes are temporarily disabled.
Configuration Restore Information:
Status : Success
Config File Name : config
Source : Flash
Time Taken : 6 Seconds
Last Run : Tue Nov 7 03:43:07 2017
Recovery Mode : Enabled
Failure Reason : -
Number of Add Commands : 0
Number of Remove Commands : 12
Time Taken for Each Phase :
Calculating diff : 2 Seconds
Adding commands : 0 Seconds
Removing commands : 0 Seconds
Configuration delete list:
vlan 2
name "VLAN2"
no ip address
exit
vlan 3
name "VLAN3"
no ip address
566 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08

HP Aruba JL253A Specifications

General

Brand	HP
Model	Aruba JL253A
Category	Switch
Language	English