HP Aruba JL253A User Manual

switch(eth-1)# rate-limit unknown-unicast
in Set a rate limit for incoming unicast flood traffic.
switch(eth-1)# rate-limit unknown-unicast in
kbps
percent
switch(eth-1)# rate-limit unknown-unicast in kbps 100
switch(eth-1)# show rate-limit
all Show total traffic rate limits.
bcast Show broadcast traffic rate limits.
icmp Show ICMP traffic rate limits.
mcast Show multicast traffic rate limits.
queues Show limits for outgoing queue traffic.
unknown-unicast Show unicast flood traffic rate limits.
switch(eth-1)# show rate-limit unknown-unicast
Unknown-Unicast Traffic Rate Limit Maximum %
Port | Inbound Limit Mode
----- + ------------- ---------
1 | 100 kbps
2 | Disabled Disabled
3 | Disabled Disabled
4 | Disabled Disabled
5 | Disabled Disabled
6 | Disabled Disabled
7 | Disabled Disabled
8 | Disabled Disabled
9 | Disabled Disabled
10 | Disabled Disabled
11 | Disabled Disabled
12 | Disabled Disabled
13 | Disabled Disabled
14 | Disabled Disabled
15 | Disabled Disabled
16 | Disabled Disabled
show rate-limit unknown-unicast
Syntax
show rate-limit unknown-unicast
Description
Displays the per port rate limit configuration.
Command context
interface
Parameters
ethernet <port-list>
To view the rate limit configuration for the specified port.
Examples
switch(eth-2)# show rate-limit unknown-unicast
Unknown-Unicast Traffic Rate Limit Maximum %
Port | Inbound Limit Mode
----- + ------------- ---------
172 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08

HP Aruba JL253A Specifications

General

Brand	HP
Model	Aruba JL253A
Category	Switch
Language	English