KEB COMBIVERT F6 Programming Manual

Analog inputs
© 2022 KEB Automation KG
475
7.3.6.5 Reset conditions
The PID controller or only the I-component of the PID controller can be reset depending
on the state machine status but also depending on digital inputs.
The value to which the I-component is reset in this case can be parameterized.
By means of an adjustable fade-out time, the controller output value can be lowered on
reset via an adjustable linear function or increased linearly at start-up.
Object an69 PID internal reset condition defines the conditions and how the PID controller
shall be reset.
Index
Id-Text
Name
Function
0x3345
an69
PID internal reset condition
Reset conditions for the PID controller
an69
PID internal reset condition
Bit
Function
Value
Plaintext
Notes
0…23
states for reset
0
no reset
All values of st12 state machine
display can be selected as reset
condition for the PID controller.
Reset is preset when not in status
"operation enabled".
1
initialisation
2
not ready to switch on
4
switch on disabled
8
ready to switch on
16
switched on
32
operation enabled
64
quick stop reaction active
128
fault reaction active
256
fault
512
shutdown reaction active
1024
disable operation active
2048
start operation active
4096
mod off pause active
8192
power off active
16384
protection time active
32768
protection time end
65536
endless protection time
131072
suppressed error
24...25
reset function
0
no PID reset
Selection how to reset the PID pro-
cess controller. The I-part is set to
the value of an72 PID preload
value.
2
24
reset I-part
2
25
disable PID
26…27
fade out func-
tion
0
no reset
Selection how the fade out func-
tion shall be initialized.
2
26
set fact to 1
2
27
reset fact to 0

KEB COMBIVERT F6 Specifications

General

Brand	KEB
Model	COMBIVERT F6
Category	Controller
Language	English