Used parameter
This displays the name of the selected object.
Replace with
This lists objects in the open Batch process cell that are not yet assigned. The only parameters
shown are those that match the parameters selected in the left list. This is exactly the case
when the original parameters' data type and unit of measure match after they are replaced
(performed in the process cell synchronization) by the data type and unit of measure of the
available parameters.
Back
Goes to the previous page. The previously configured data (allocations) remain intact.
Next
Goes to the next page. If editing of the data on the current page is not complete, an error
message is output and the problematic element is marked in the list.
14.2.7.5 Import - overview
Introduction
All allocations that you have made are listed again in this dialog box. Please check the listing
and then start the import process.
Note
Copy the previously marked text via the clipboard to a document of the "Wordpad" application
to document the allocation information formatted for the import.
Back
Goes to the previous page. Previously configured data (allocations) can thus be corrected.
Finish
This button triggers the import.
Context help references
14.2 BCC menu commands
SIMATIC BATCH V8.2
1088 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
