information of the PC stations with BATCH applications). Through the download the
configuration data are loaded into the target systems according to this distribution.
Batch types
This object is used to generate batch types and to save batch types from batch process cells
in order to insert them into other batch process cells.
14.1.11.23 BATCH application
Definition
This object represents a BATCH application. Here, it is a representative for the BATCH Control
Server, project database, offline database, and/or online database components.
The BATCH server (BATCH Control Server) and the BATCH clients of a process cell project
generally run on different PCs. In order to download and distribute the process cell data of a
project among these PCs, a SIMATIC PC station must be created for each BATCH server and
BATCH client in the component view (SIMATIC Manager). The SIMATIC PC stations
necessary for this are configured in HW Config with the BATCH application.
See also
Basics of configuration (Page 124)
Configuring the BATCH server (Page 126)
14.1.11.24 BATCH application (stdby)
Definition
This object represents a BATCH application. Here, it is a representative for the redundant
BATCH Control Server, project database, offline database, and/or online database
components.
A SIMATIC PC station must be created for each redundant batch application in the component
view (SIMATIC Manager). The SIMATIC PC stations necessary for this are configured in HW
Config with "BATCH application (stdby)".
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 851
To Next Page
Loading...
Need help?
General
