To Next Page

To Previous Page

Reading in information about Batch process cell data (not included in the "Basic procedure" graphic)

This is executed explicitly via an operation so that the process cell data can be specifically

imported into the batch system. This can be entered at any BATCH client within BatchCC.

There is an internal comparison and synchronization of the new with the old process cell data.

For more information about reading in the process cell data (Page 289), refer to the chapter

"BATCH Control Center".

7.3.6 Display number of units

If you want to know how many available units (UNIT_PLC instances) are in your project, for

example, to be able to order the required authorization for SIMATIC BATCH, open the

corresponding report in the BATCH configuration dialog.

Procedure in the SIMATIC Manager

1. Open the BATCH configuration dialog with the Options > SIMATIC BATCH > Open

configuration dialog menu command.

2. Select the folder of your batch process cell (process cell folder) in the navigation window.

3. Click on "Display" in the "Protocol" area.

Result

The log window is displayed with the data. The number of configured and available units is

also displayed.

Siemens SIMATIC BATCH User Manual

Questions and Answers: