Time-of-day and date
Note
The time and date are displayed in the batch reports as defined and activated in the country
settings.
This is independent of the language of the operating system and the language selected in the
PCS 7 setup.
No more than two characters should be used for the day, no more than three characters for
the month and no more than four characters for the year. If you select larger formats, the
display of the date may be truncated due to the restricted output window.
9.9.3 Displaying archived batches
9.9.3.1 Viewer for archived batches
Overview
Batches you have archived can be visualized again as control recipes. The viewer for archived
batches contains functions for opening archives from a PH (Process Historian) as well as from
archive files. The basic requirement for connecting to the PH database is the specification of
a user name and password in the project settings under "User credentials".
To display control recipes of archived batches, open the viewer by selecting the "Options >
Start viewer for archived batches" menu command in the BATCH Control Center. Use one of
the following commands in this dialog:
● Open batch from file
● Open batch from PH
Depending on your selection, the "Open" selection dialog opens or the "Find batch" filter dialog
opens for archives from a PH.
BATCH Control Center
9.9 Report creation and archiving of batch data
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 483
To Next Page
Loading...
Need help?
General
