Siemens SIMATIC BATCH User Manual

9.8.3.9 Parameter trigger and start lock
Checking setpoints with parameter triggers
By setting the IPARAM input, the recipe phase informs the equipment phase that there are
new setpoints. This is the case prior to starting, when there is a change of control strategy or
after parameter changes when a phase is active. This gives the equipment phase the
opportunity of checking the setpoints and preventing the start with the start lock.
BATCH Control Center
9.8 Batch control
SIMATIC BATCH V8.2
398 Operating Manual, 02/2016, A5E35958174-AA

Siemens SIMATIC BATCH Specifications

General

Brand	Siemens
Model	SIMATIC BATCH
Category	Control Systems
Language	English