11.5.4.26 StartModeVisible
Boolean variable.
This attribute specifies whether or not the start mode of batches is displayed in the control.
Default: Yes.
The attribute can be dynamized with the StartModeVisible name.
11.5.4.27 StartMode
Enumeration.
With this attribute, you specify a start mode for batches. You have three options available:
● Manual - 0: Manual start.
● Instant - 1: Immediate start.
● Time - 2: Time-controlled start.
Default: Manual - 0.
The attribute can be dynamized with the StartMode name.
11.5.4.28 AutoReleaseBatchVisible
Boolean variable.
With this attribute, you specify whether or not the "Release batches automatically" check box
is displayed and can be enabled in the control.
Default: Yes.
The attribute can be dynamized with the AutoReleaseBatchVisible name.
11.5.4.29 AutoReleaseBatch
Boolean variable.
With this attribute, you decide whether or not the "Release batches automatically" check box
is enabled in the control.
Default: Yes.
The attribute can be dynamized with the AutoReleaseBatch name.
11.5.4.30 BatchNamePattern
String.
With this attribute, you store the name under which the batch will be created.
Default: None.
The attribute can be dynamized with the BatchNamePattern name.
BATCH OS controls
11.5 Control properties references
SIMATIC BATCH V8.2
662 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
