11.5.4.38 RecipeOrFormulaListColumnOrderAndVisibility
String.
This attribute defines the sequence of the table columns in the dialog for selecting recipes/
formulas.
The values are separated by a semicolon and entered in the following syntax: 1;2;3;4;5;6;7.
By changing the sequence of the values, you make a corresponding change in the column
sequence. The value 5 has no function, but should not be deleted.
Default: 1;2;3;4;5;6;7.
The attribute can be dynamized with the RecipeOrFormulaListColumnOrderAndVisibility
name.
11.5.4.39 RecipeOrFormulaListColumnResizeEnabled
Boolean variable.
This attribute specifies whether or not the width of the table columns in the dialog for selecting
recipes/formulas can be adapted. If "Yes" is set, an operator can adapt the column width in
process mode.
Default: Yes.
The attribute can be dynamized with the RecipeOrFormulaListColumnResizeEnable name.
11.5.4.40 RecipeOrFormulaListColumnFilterVisible
Boolean variable.
This attribute specifies whether or not a filter row is displayed for each table column in the
dialog for selecting recipes/formulas.
Default: Yes.
The attribute can be dynamized with the RecipeOrFormulaListColumnFilterVisible name.
11.5.5 SIMATIC BATCH OS Monitor
11.5.5.1 CommunicationChannel
String.
Defines the communication channel for the selected BATCH project. Select the same
communication channel that you use in the "SIMATIC BATCH OS Master" control. This
ensures that you obtain the data for the unit allocation from the relevant BATCH project.
Default value = 1.
The attribute can be dynamized with the name CommunicationChannel.
BATCH OS controls
11.5 Control properties references
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 665
To Next Page
Loading...
Need help?
General
