Result:
The batch changes to the "locked" status.
To change a locked batch back to the "released" status, use the Control > Unlock menu
command.
9.6.4.4 Canceling a batch
Batches can also be canceled. After it has been canceled, a batch can no longer be used; in
other words the batch can no longer be released or started.
Procedure
1. Select the batch in the planning list or in the navigation window of the BatchCC.
2. Select the Control > Cancel menu command.
Result
The batch changes to the "canceled" status. You can only delete a canceled batch.
9.7 Electronic signature
9.7.1 Specifying electronic signatures
SIMATIC BATCH supports the function "Electronic signature" according to the requirements
as regards FDA or 21 CFR Part 11.
The "electronic signatures" function allows you to enter one or more electronic signatures in
the form of dialogs similar to the logon prompts normal in Windows when defined actions are
taken with BATCH objects such as batches, recipes, recipe elements etc.
If an electronic signature is not entered, this prevents the corresponding operator action being
taken.
The entered signature data is saved in the batch history or in the relevant object being
manipulated and is available for subsequent evaluation (logging).
The actions taken with BATCH objects for which the "Electronic signatures" function is
activated can be defined for specific roles (permissions) in the "ESIG" dialog box. The acronym
"ESIG" stands for "Electronic signature".
Requirement
The SIMATIC Logon software verifies the logon data. This means that SIMATIC Logon must
be installed on the BATCH clients.
BATCH Control Center
9.7 Electronic signature
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 375
To Next Page
Loading...
Need help?
General
