Table column Column width in pixels
ROP runtime 50
Formula 100
The values are entered, separated by a semicolon. The attribute can be dynamized with the
ColumnWidth name.
11.5.2.4 ColumnOrderAndVisibility
String.
Specifies the sequence of the table headers in the control. The values in the following table
define the table column.
Column name Value
Unit 1
Batch 2
Batch runtime 3
Order category 4
Order 5
Master recipe 6
RUP (recipe unit procedure) 7
RUP runtime 8
ROP (recipe operation) 9
ROP runtime 10
Formula 11
The values are separated by a semicolon and entered in the following syntax:
1;2;3;4;5;6;7;8;9;10;11. By changing the number sequence, you make a corresponding change
to the column name sequence.
The attribute can be dynamized with the ColumnOrderAndVisibility name.
11.5.2.5 ColumnResizeEnabled
Boolean variable.
This attribute specifies whether or not the column width of the table in the control can be
adapted by the operator. If Yes is set, an operator can adapt the column width in process mode.
Default: Yes, the column width can be changed.
The attribute can be dynamized with the ColumnResizeEnabled name.
11.5.2.6 ColumnFilterVisible
Boolean variable.
The attribute specifies whether or not a filter row is displayed for each table column.
Default: Yes.
BATCH OS controls
11.5 Control properties references
SIMATIC BATCH V8.2
648 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
