11.4.14 Positioning BATCH OS controls
Undocking and automatically undocking OS controls
When the "Dock/Undock" or "Undock automatically" commands are used, the OS controls are
generally opened on the screen where the mouse pointer is positioned. It is possible to move
OS controls around the workspace. The size and position of each OS control are stored in
memory. When an OS control is undocked again manually or automatically, the stored size
and location are used to display it.
Changing the size of an OS control
You can reduce the width of all outdocked OS controls so that the toolbar with the commands
will be cut off. Click on the chevron symbol to expand the toolbar.
11.4.15 Filtering in BATCH OS controls
Using filters in OS controls
For filtering the lists, you can generally use the placeholders "*" and "?" for other characters
in all OS controls. Filter searches are not case-sensitive. The linking character " | ", also often
referred to as "pipe", is interpreted as "or".
Example
The search criterion "a*|b*" shows all rows with columns that start with a or b.
Note
If you are using the linking character " | " in folder names within the BatchCC, it cannot be
resolved as a search criterion in the OS controls.
BATCH OS controls
11.4 Applications in process mode
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 637
To Next Page
Loading...
Need help?
General
