● Operator instruction: EOP and EPH type recipe phases that are configured for operator
instruction and NOP for simple operator instruction
● Library reference
Library object: Recipe operations
A library of library operations can be created for hierarchical recipes. A library operation is an
ROP consisting of steps of the type RF. When creating the library step sequence, this is
assigned to a unit class so that the recipe steps access the equipment phases (EPH) of this
unit class. The unit allocation is made when you bind in the recipe step sequence of a recipe
unit procedure (RUP).
Library object: Substructure
A library consisting of substructures, in turn consisting of operator instructions, recipe
operations of the type EOP or recipe phases of the type EPH can be created for flat recipes .
Different unit classes/units can be assigned to the recipe steps of the substructure.
10.2 Starting and operating
10.2.1 Starting the BATCH Recipe Editor
Various options
There are three different ways in which you can start the BATCH Recipe Editor:
● From the Start menu of Windows
● Using the menu command in BatchCC
● Automatically by opening a recipe in BatchCC
Starting in the Start Menu of Windows
● Go to the Start menu of Windows and select the menu command
Start > Siemens Automation > SIMATIC > BATCH Recipe Editor.
BATCH Recipe Editor
10.2 Starting and operating
SIMATIC BATCH V8.2
490 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
