Procedure in the "Settings" dialog in the SIMATIC Manager
1. In the "Settings" dialog, open the "Download" tab with the menu command Options >
SIMATIC BATCH > Compile/Download.
2. In the "Merge/Compile" tab, you can decide whether or not the batch types are generated
prior to merging/compiling and whether the messages should be transferred to the PCS 7
OS.
3. Go to the "Download" tab.
4. In the "Download" tab, all PC stations for BATCH servers (single, redundant), database
servers and BATCH clients are displayed with information about their download status.
5. Press "OK" to start the download processes based on your settings on the components.
6. When successfully completed, the "Downloaded" status is shown for the respective
components in the dialog. A log of the individual configuration steps is also displayed.
Engineering
7.3 BATCH engineering
SIMATIC BATCH V8.2
204 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
