Siemens SIMATIC BATCH User Manual

Once the unit is allocated, the product is conveyed out of the "intermediate container" into the
new unit.
Step 6
Since the process should continue to ROP2, ROP1 must first be reset. ROP2 can then be
restarted.
Step 7
Once the transition has been reset, the batch can continue at the interrupted position by starting
Phase3.
BATCH Control Center
9.8 Batch control
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 455

Siemens SIMATIC BATCH Specifications

General

Brand	Siemens
Model	SIMATIC BATCH
Category	Control Systems
Language	English