Process actions and their confirmation in the dialog
A dialog appears for all your process actions to confirm the action you have triggered. All
actions in the confirmation dialog create messages in the control, providing you with important
information on process actions and the system.
Buttons:
Button
Icon
Check box
Meaning
Yes.
Note: The button label may vary depend‐
ing on the action
You confirm the selected action by clicking "Yes".
Yes, all. You confirm the selected action for all objects by clicking
"Yes, all".
No. The selected action will not be performed.
Cancel Cancels one or more actions. The action will not be per‐
formed.
Close dialog
(Close button at the top right of the dialog.)
Closes the confirmation dialog with no action performed.
The action remains pending and can be performed at a
later point in time. To do this, open the message again.
Title bar A symbol suitable to the action is displayed with the dialog
name.
Action symbol with message text The corresponding symbol and the message text are
shown in the dialog for every action.
"Close dialog automatically in ... seconds"
check box
If you select the check box, the confirmation dialog is au‐
tomatically closed after a time specified by the system.
If you clear the check box, the dialog remains open until
you close it.
Table headers in the control
The control has the following table headers:
● Msg. no. Message number The message number is generated sequentially by the system.
● Status: In addition to the status information in text form, each message status also contains
a status symbol to make it easier to understand. See Icons for the message status.
● Message: Meaningful message in text form.
● Date: Time stamp of the message in the date format (DD.MM.YYYY) and time format
(SS:MM:HH) (UTC +1). UTC = Universal Time Code.
BATCH OS controls
11.3 Operations in process mode
SIMATIC BATCH V8.2
622 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
