Process cell data
For navigation in the process cell data
Properties
Name of the object selected in the process cell tree.
Description You can display or enter the description of the process tag type parameter
in this text box.
Allocated data type Allocate the desired data type to the type parameter. All standard data types
and user data types are available for selection. You must first specify user
data types you require in "Data types".
Allocated unit of measure Allocate the physical unit of measure to the type parameter. You must first
specify units of measure you require in "Unit of measure".
"Unit of measure" button Activating this button takes you to the appropriate unit. With the Back button
of the unit of measure, you return to this location.
Parameters Here, one of the available parameter names of a TRANS block is selected:
● Parameter of the data type Boolean: TP1 to TP10
● Parameter of the data type floating point: TP11 to TP20
Archive measured value Here, you select a type parameter when you require a connection to a
WinCC process tag. This selection is necessary for the assignment of type
parameter -> process tag archive tag that you then make in the instance
parameter of the corresponding operation type.
Check manufacturing in‐
struction
Here, you select a type parameter if it is intended for manual testing (man‐
ufacturing instruction) in the batch report.
Move up/Move down Opening the type in the process cell tree displays all process tag type pa‐
rameters for a selected process tag. By selecting and dragging them with
the mouse these can be moved to any location within a process tag type.
In the sequence thus specified the parameters of this process tag type are
displayed for recipe creation in the parameter list of the recipe step.
Data type Clicking this button jumps to the corresponding Batch data type. With the
Back button of the Batch data type, you return to this location.
Note
Editing, creating, and deleting batch types is only possible in the single project or in the
multiproject. In all other projects, the type descriptions are read-only!
Parameter
Button
Delete Deletes the selected process tag type parameter.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 901
To Next Page
Loading...
Need help?
General
