Siemens SINUMERIK 840D Operation/Programming

2
Operation 10.04
2.16 Sho
p
Mill O
p
en
(
PCU 50
)
2
 Siemens AG, 2004. All rights reserved
2-168 SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
2.16 ShopMill Open (PCU 50)
The ShopMill software is available for the PCU 50 in two versions,
ShopMill Classic and ShopMill Open. ShopMill Classic is the software
package previously marketed under the name ShopMill.
The difference between ShopMill Open and ShopMill Classic is that
the Open variant has a basic menu bar or extended basic menu bar.
ShopMill Open does not offer the option of switching to the CNC ISO
user interface. Instead, the HMI Advanced operating areas "Services",
"Diagnosis", "Start-up", and "Parameters" (without tool management
and work offsets), are located directly on the extended horizontal
softkey bar.
Parameters
Diagnosis
Start-Up
Services
For a detailed description of the integrated HMI Advanced operating
areas, please refer to:
References: /BAD/, Operator's Guide HMI Advanced
SINUMERIK 840D/840Di/810D
Some of the softkeys in the basic menu or extended menu bars may
be assigned to other operating areas by the machine manufacturer.
Please refer to the machine manufacturer's instructions.
2.17 Remote diagnostics
The control system can be operated from an external PC by means of
a remote diagnostic function. You can use a modem to link the control
system and the external PC.
Remote
diagnosis
The remote diagnostics function is activated on the CNC ISO operator
interface in the Diagnosis operating area.
Remote Diagnosis is a software option.
For further information about remote diagnosis, please refer to:
References: /FB/, Description of Functions Extended Functions, F3


Siemens SINUMERIK 840D Specifications

General

Brand	Siemens
Model	SINUMERIK 840D
Category	Control Unit
Language	English