Siemens SINUMERIK ONE MCP 2400.4c Function Manual

Data Lists
5.1 Machine data
Mode Group, Channel, Program Operation, Reset Response (K1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
5-5
5.1.2.5 Transformation definitions
Number Identifier: $MC_ Description
24100 TRAFO_TYPE_1 Definition of transformation 1 in channel
24110 TRAFO_AXES_IN_1 Axis assignment for transformation
24120 TRAFO_GEOAX_ASSIGN_TAB_1 Assignment between GEO axis and channel axis for
transformation 1
24200 TRAFO_TYPE_2 Definition of transformation 2 in channel
24210 TRAFO_AXES_IN_2 Axis assignment for transformation 2
24220 TRAFO_GEOAX_ASSIGN_TAB_2 Assignment between GEO axis and channel axis for
transformation 2
24300 TRAFO_TYPE_3 Definition of transformation 3 in channel
24310 TRAFO_AXES_IN_3 Axis assignment for transformation 3
24320 TRAFO_GEOAX_ASSIGN_TAB_3 Assignment between GEO axis and channel axis for
transformation 3
24400 TRAFO_TYPE_4 Definition of transformation 4 in channel
24410 TRAFO_AXES_IN_4 Axis assignment for transformation 4
24420 TRAFO_GEOAX_ASSIGN_TAB_4 Assignment between GEO axis and channel axis for
transformation 4
24430 TRAFO_TYPE_5 Definition of transformation 5 in channel
24432 TRAFO_AXES_IN_5 Axis assignment for transformation 5
24434 TRAFO_GEOAX_ASSIGN_TAB_5 Assignment between GEO axis and channel axis for
transformation 5
24440 TRAFO_TYPE_6 Definition of transformation 6 in channel
24442 TRAFO_AXES_IN_6 Axis assignment for transformation 6
24444 TRAFO_GEOAX_ASSIGN_TAB_6 Assignment between GEO axis and channel axis for
transformation 6
24450 TRAFO_TYPE_7 Definition of transformation 7 in channel
24452 TRAFO_AXES_IN_7 Axis assignment for transformation 7
24454 TRAFO_GEOAX_ASSIGN_TAB_7 Assignment between GEO axis and channel axis for
transformation 7
24460 TRAFO_TYPE_8 Definition of transformation 8 in channel
24462 TRAFO_AXES_IN_8 Axis assignment for transformation 8
24464 TRAFO_GEOAX_ASSIGN_TAB_8 Assignment between GEO axis and channel axis for
transformation 8
24500 TRAFO5_PART_OFFSET_1 Offset vector of 5-axis transformation 1
24510 TRAFO5_ROT_AX_OFFSET_1 Position offset of rotary axes 1/2 for 5axis
transformation 1
24520 TRAFO5_ROT_SIGN_IS_PLUS_1 Sign of rotary axis 1/2 for 5axis transformation 1
24530 TRAFO5_NON_POLE_LIMIT_1 Definition of pole limit for 5-axis transformation 1
24540 TRAFO5_POLE_LIMIT_1 Pole end angle tolerance for interpolation for 5axis
transformation 1
24550 TRAFO5_BASE_TOOL_1 Vector of base tool on activation of 5-axis
transformation 1

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English