Brief Description
1.2 Coordinate systems
Axis Types, Coordinate Systems, Frames (K2)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
1-3
This type of reference consists of:
• Axis container number
• A slot (circular buffer location within the corresponding container)
The entry in a circular buffer location contains:
• A local axis
or
• A link axis
The axis container function is described in:
References:
/FB2/ Multiple Operator Panels on Multiple NCUs, Distributed Systems (B3)
1.2 1.2 Coordinate systems
MCS
The machine coordinate system (MCS) has the following properties:
• It is defined by the machine axes.
• The machine axes can be perpendicular to each other to form Cartesian system or
arranged in any other way.
• The names of the machine axes can be defined.
• The machine axes can be linear or rotary axes.
BCS
The basic coordinate system (BCS) has the following properties:
• The geometry axes form a perpendicular Cartesian coordinate system.
• The BCS is derived from a kinematic transformation of the MCS.
BZS
The basic zero system (BZS) is the basic coordinate system with a basic offset.
SZS
The settable zero system (SZS) is the workpiece coordinate system with a programmable
frame from the viewpoint of the WCS. The workpiece zero is defined by the settable frames
G54 to G599.
To Next Page
Loading...
Need help?
General
