How to ? Copy waveform data
6. Set the Image Options:
a. Select a color Palette for your copied images.
b. SelecttheimageView:tocopyanimageoftheentire screen, select Full-screen; to copy an
image of the selected graticule, select Graticule(s) only.
c. The Screen Capture Format is BMP only.
7. Set the Waveform Options:
a. Open the Wav
eforms tab.
b. Select the data format (Data Destination) for the waveform you want to copy.
c. Select a valid waveform from the Source list.
d. Select the Include waveform scale factors check box if you want to include waveform details
like header information (record length, sample interval, trigger point information, and so on).
If you only want to include the waveform voltage values, clear the selection.
e. Select the number of samples that you want to copy from the Waveform curve data range.
Select all samples, a range of samples, or only the samples between the cursors. If you select
Save Sa
mples between Cursors, you can use the multipurpose knobs to adjust the positions if
the cursors are alread y active. If they are not, the cursors are activate d in their most recent
positions.
f. If you are copying Fast Acquisitions data, select the data ordering from the list.
8. Set t
he Measurement Options:
a. Open the Measurements tab.
b. Select either Displayed Measurements (make sure that measurements are displayed in the
graticule via the Measurement Control window) or Histogram Data.
c. If you clicked the Displayed Measurements option, select the Data Format, either Numeric or
Text.
9. Click Copy to save your setup information to the Windows clipboard.
632 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series
To Next Page
Loading...
Need help?
General
