9.2 Overview of FRENIC Loader
9-12
[4] Test-running
The Test-running feature allows you to test-run the motor in the forward or reverse direction while
monitoring the running status of the selected inverter.
Figure 9.2-2
* The details of the operation buttons are described in the table below.
Table 9.2-2
Button Function
STOP Stop the motor.
FWD Run the motor forward. (The indented appearance of the button
indicates that the button is active and the motor is running.)
REV Run the motor reverse. (The indented appearance of the button
indicates that the button is active and the motor is running.)
RESET Reset all alarm information saved in the selected inverter.
To Next Page
Loading...
Need help?
General
