HEIDENHAIN QUADRA-CHEK 2000 User Manual

Commissioning | Steps for commissioning
7
7.3.1 Basic settings
Setting the date and time
Tap Settings in the main menu
Tap General
Tap Date and time
The set values are displayed in the following format: Year,
month, day, hour, minute
To set the date and time in the middle line, drag the columns
up or down
Tap Set to confirm
Select the desired format from the Date format list:
MM-DD-YYYY: Display as month, day, year
DD-MM-YYYY: Display as day, month, year
YYYY-MM-DD: Display as year, month, day
Further information: "Date and time", Page 350
Setting the units of measure
You can set various parameters to define the units of measure, rounding methods
and decimal places.
Tap Settings in the main menu
Tap General
Tap Units
To set a unit of measure, tap the corresponding drop-down
list and select the unit
To set the rounding method, tap the corresponding drop-
down list and select the rounding method
To set the number of decimal places displayed, tap – or +
Further information: "Units", Page 350
Activating the Software options
Additional Software options can be enabled on the product via a License key.
You can view the enabled Software options on the overview page.
Further information: "Checking the Software options", Page 104
Requesting license key
You can request a license key by using the following procedure:
Reading out device information for the license key request
Creating a license key request
102
HEIDENHAIN | QUADRA-CHEK 2000 | Operating Instructions | 07/2019

HEIDENHAIN QUADRA-CHEK 2000 Specifications

General

Brand	HEIDENHAIN
Model	QUADRA-CHEK 2000
Category	Measuring Instruments
Language	English