HEIDENHAIN QUADRA-CHEK 2000 User Manual

Installation |
NOTICE
Damage to the product due to incorrect wiring!
The incorrect wiring of inputs or outputs can cause damage to the unit or to
peripheral devices.
Comply with the pin layouts and specifications of the product
Assign only pins or wires that will be used
Further information: "Specifications", Page 407
5.3 Device overview
The connections on the rear panel of the device are protected by dust protection
caps from contamination and damage.
NOTICE
Contamination or damage may result if the dust protection caps are
missing!
If no dust protection caps are fitted to unused connections, this may impair the
proper functioning of the contacts or destroy them.
Remove dust protection caps only when connecting measuring devices or
peripherals
If you remove a measuring device or peripheral, re-attach the dust protection
cap to the connection
The type of connections for encoders may vary depending on the
product version.
5
HEIDENHAIN | QUADRA-CHEK 2000 | Operating Instructions | 07/2019
47

HEIDENHAIN QUADRA-CHEK 2000 Specifications

General

Brand	HEIDENHAIN
Model	QUADRA-CHEK 2000
Category	Measuring Instruments
Language	English