HEIDENHAIN QUADRA-CHEK 2000 User Manual

Quick Start | Conducting a measurement
9
Select OED in the tool palette
With the OED sensor, traverse the edge of the circle
The product records the measuring point and saves it to the
clipboard
To confirm the measuring point acquisition, tap Enter in the
Inspector
A new feature is displayed in the feature list
If the OED sensor traverses an edge, a measuring
point is recorded in the clipboard.
To add the measuring point to the point cloud of the
feature, tap Enter in the Inspector.
To acquire more measuring points, repeat these steps
Tap Finish in the new feature
The circle is displayed in the feature list
The measurement result preview appears
Figure 46: Circle feature in the feature list with Measurement result preview
196
HEIDENHAIN | QUADRA-CHEK 2000 | Operating Instructions | 07/2019

HEIDENHAIN QUADRA-CHEK 2000 Specifications

General

Brand	HEIDENHAIN
Model	QUADRA-CHEK 2000
Category	Measuring Instruments
Language	English