HEIDENHAIN QUADRA-CHEK 2000 User Manual

Basic operation | User login and logout
6
6.5.1 User login
Tap User login in the main menu
Select the user in the drop-down list
Tap the Password input field
Enter the user's password
User Default password Target group
OEM
oem Commissioner,
machine tool builder
Setup
setup Setup engineer,
system configurer
Operator
operator Operator
Further information: "Logging in for Quick Start", Page 178
If the password does not match the default
password, ask a Setup user or OEM user for the
assigned password.
If the password is no longer known, contact a
HEIDENHAIN service agency.
Confirm entry with RET
Tap Log in
The user is logged in and the Measure menu is displayed
The user login icon in the main menu shows whether the logged-in user has
extended authorizations.
Icon Authorization level
Standard authorizations (user type operator)
Extended authorizations (all other user types)
Further information: "Target groups according to user types", Page 22
6.5.2 User logout
Tap User login in the main menu
Tap Log out
The user is logged out
All functions of the main menu are inactive, except for Switch
off
The product can only be used again after a user has logged in
62
HEIDENHAIN | QUADRA-CHEK 2000 | Operating Instructions | 07/2019

HEIDENHAIN QUADRA-CHEK 2000 Specifications

General

Brand	HEIDENHAIN
Model	QUADRA-CHEK 2000
Category	Measuring Instruments
Language	English