Honda NC700 2012 User Manual

2-18
dummyheaddummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
Remove the luggage box assembly screws [1].
Release the tabs [2] and remove the luggage box lids B
[3] from the luggage box lid A [4].
Installation is in the reverse order of removal.
REMOVAL/INSTALLATION (NC700S/SA/SD)
Open the luggage box lid using the ignition key.
Remove the luggage box assembly screw (long) [1] and disconnect the band [2].
Remove the following:
– Luggage box lid mounting socket bolts [3]
– Luggage box lid lock plate mounting screw [4]
– Luggage box lid assembly screws [5]
– Inner luggage box lid [6]
– Luggage box lid lock plate [7]
– Center luggage box lid [8]
– Left luggage box lid [9]
– Right luggage box lid [10]
Installation is in the reverse order of removal.
TORQUE:
Luggage box lid assembly screw:
0.9 N·m (0.1 kgf·m, 0.7 lbf·ft)
Luggage box lid lock plate mounting screw:
4.0 N·m (0.4 kgf·m, 3.0 lbf·ft)
Luggage box lid mounting socket bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
[1]
[3][2]
[4]
TORQUE:
Luggage box lid assembly screw:
0.9 N·m (0.1 kgf·m, 0.7 lbf·ft)
Luggage box lid lock plate mounting screw:
4.0 N·m (0.4 kgf·m, 3.0 lbf·ft)
Luggage box lid mounting socket bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
[4]
[1]
[2]
[7] [6]
[3]
[3]
[8] [9][10]
[5]

Honda NC700 2012 Specifications

General

Brand	Honda
Model	NC700 2012
Category	Motorcycle
Language	English