18-22
dummyheaddummyhead
REAR WHEEL/SUSPENSION
ASSEMBLY
Install the collar [1] to the shock absorber bracket.
Apply molybdenum disulfide grease to new dust seal
rips.
Install the distance collar [1] and dust seals [2] to the
swingarm pivot.
Install the dust seal flush with the pivot surface.
Install the wide pivot collar [3] to the swingarm right
pivot.
Install the narrow pivot collar [4] to the swingarm left
pivot.
PIVOT COLLAR
DRIVE CHAIN SLIDER
SWINGARM
DRIVE CHAIN ADJUSTERS
DUST SEAL
DISTANCE COLLAR
NEEDLE BEARING
PIVOT COLLAR
DUST SEAL
SNAP RING
BEARING
NEEDLE BEARING
COLLAR
5.9 N·m (0.6 kgf·m, 4.4 lbf·ft)
WASHER
NEEDLE BEARING
NEEDLE BEARING
To Next Page
Loading...
Need help?
General
