EasyManuals Logo
Home>Honda>Motorcycle>NC700 2012

Honda NC700 2012 User Manual

Honda NC700 2012
773 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
1-88
dummyheaddummyhead
GENERAL INFORMATION
ECM-to-COMBINATION METER TWO-WAY SERIAL COMMUNICATION (NC700X/XA/S/SA)
This motorcycle is equipped with the ECM-to-combination meter two-way serial communication system.
ECM sends the following information to combination meter:
Engine speed signal
HISS indicator signal, MIL signal, Engine oil pressure indicator signal, High coolant temperature indicator signal
Combination meter sends the following information to the ECM.
VS sensor signal
EOP switch line open circuit information
The combination meter detects a problem in the VS sensor and EOP switch line.
The combination meter diagnosis the VS sensor failure, then send the DTC 11-1 to the ECM and ECM send the MIL signal to
the combination meter.
The combination meter send the EOP switch line open circuit information to the ECM, then ECM diagnosis the EOP switch line
failure and send the DTC 87-1 signal to the combination meter.
These signals are forwarded to the combination meter or ECM by asynchronous communication via one wire. This wire is called the
TXD/RXD line (serial communication line).
WHEN THERE IS A PROBLEM IN THE TXD/RXD LINE
When an open or short circuit occurs in the TXD/RXD line, the combination
meter indicate the following:
MIL [1] come on.
Engine oil pressure indicator [2] come on.
Tachometer go off.
High coolant temperature indicator go off.
HISS indicator go off.
When the ECM did not receive the meter information, the ECM store the
DTC 86-1. Check the DTC 86-1 with the HDS pocket tester (page 4-12).
Check the ECM by ECM communication diagnostic mode (page 22-11).
Check the combination meter by combination meter communication
diagnostic mode (page 22-11).
TXD/RXD LINE
To COMBINATION METER:
– Engine speed signal
– HISS indicator signal
– MIL signal
– Engine oil pressure indicator signal
– High coolant temperature indicator signal
To ECM:
– VS sensor signal
– EOP switch line open circuit information
ECM
ECT SENSOR
EOP SWITCH
CKP SENSOR
IMMOBILIZER
RECEIVER
COMBINATION
METER
VS SENSOR
[1] [2]

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda NC700 2012 and is the answer not in the manual?

Honda NC700 2012 Specifications

General IconGeneral
BrandHonda
ModelNC700 2012
CategoryMotorcycle
LanguageEnglish

Related product manuals