Honda NC700 2012 User Manual

17-36
dummyheaddummyhead
FRONT WHEEL/SUSPENSION/STEERING
Loosen the steering stem adjusting nut [1] using a
special tool.
Hold the steering stem and remove the steering stem
adjusting nut.
Remove the following:
– Dust seal [1]
– Upper bearing inner race [2]
– Upper steering head bearing [3]
– Steering stem [4]
– Lower steering head bearing [5]
BEARING REPLACEMENT
Replace the
bearing, outer and
inner races as a
set.
Remove the upper outer race using a special tool.
Remove the lower bearing outer race using the special
tool and suitable shaft.
TOOL:
Steering stem socket [2] 07916-3710101
[1] [2]
[2]
[4]
[5][1]
[3]
TOOLS:
Ball race remover set 07953-MJ10000
Remover attachment [1] 07953-MJ10100
Remover handle [2] 07953-MJ10200
[2]
[1]
TOOL:
Bearing remover [1] 07946-3710500
[1]

Honda NC700 2012 Specifications

General

Brand	Honda
Model	NC700 2012
Category	Motorcycle
Language	English